Product Name: Ballast Support System

Product number: TL-GD-BM-00

The Ballast Support System is a mounting system for ground or flat roofs. The ballast system uses a stainless steel square pass as the main force-bearing member, and is fixed on the ground or flat roof by the system itself and the weight of the ballasted cement block without damaging the original structure of the installed surface; the parts included in this bracket system are available. The front and rear feet for angle adjustment, ballast piece, guide rail connection block, guide rail, base, etc.; in addition, the ballast system is fastened by standard stainless steel screws, and there are 2~3 types of screws, so the tools used during installation only need 2~3 kinds are enough. In order to facilitate the installation and use of customers, the components of our ballast system configuration are delivered to customers in the form of highly pre-assembled complete sets before they are shipped. Customers can install them directly after they get them, and do not need to do a second time. processing.

Photovoltaic bracket accessories are as follows:

First, easy installation.

Pre-installed bracket accessories save time and effort for on-site installation, which can greatly reduce construction costs 

Second, high durability

20-year life photovoltaic bracket design concept, high-strength material guarantee.

III. International standards

Comply with European, American, Australian and other photovoltaic standards

Four. Wide applicability. 

The slanted roof photovoltaic mounting system is suitable for all kinds of general framed solar panel installations on the existing market, from small solar systems to large and even several megawatt systems. .

Design requirements: AS/NZS 1170 and other international common standards, etc.

Installation environment: on level ground or flat roof                    

Installation angle: 0~60°

Installation height: within 5 meters from the ground                     

System Material: AL 6005-T5 & Q235

Wind speed: 45m/s                             

System Color: Natural or Custom                          

Snow load resistance: 1.4KN/㎡                          

Finish: Stainless Steel & Hot-Dip Galvanized

Warranty Commitment: 10-year warranty, 20-year service life