UB system is a very suitable installation system on the ground, which can adapt to various installation environments. Widely used in the construction of photovoltaic power plants. Our UB system is safe and secure, and its structural design conforms to mechanical specifications. U-shaped steel pipe is used as the main force-bearing member; this bracket system is supplemented by supporting parts including front and rear feet, connecting square steel, guide rail, guide rail connector, tripod cap assembly, side pressure, medium pressure, U-bolt assembly In addition, the U-bolt ground support system is fastened by standard stainless steel screws, and there are 2~3 types of screws, so only 2~3 types of tools are required for installation. In order to facilitate the installation and use of customers, the components of our UB system are delivered to customers in the form of highly pre-assembled complete sets of components. After customers get them, they can be installed directly without additional secondary processing. .

• Accessory name		Numbering	Specifications	Material	Pre-installed accessories	wrapper
  Tripod Cap Assembly		TL-GM-CP	Φ60	Q235	SUS304 screw kit	Double pit carton (K=K)
  Front and rear feet and horizontal tubes		TL-CP-60	Φ60	Q235	SUS304 screw kit	Stretch film+kraft paper
  U-bolt assembly		TL-GM-SK		Q235	SUS304 screw kit	Double pit carton (K=K)
  rail connection block		TL-CR-CP	200mm	AL 6005-T5	SUS304 screw kit	Double pit carton (K=K)
  Medium pressure		TL-IC-F	30/35/40/45/50mm	AL 6005-T5	SUS304 screw kit	Double pit carton (K=K)
  Side pressure		TL-EC-F	30/35/40/45/50mm	AL 6005-T5	SUS304 screw kit	Double pit carton (K=K)
  Connecting square steel		TL-CT-40	40*40mm	Q235	SUS304 screw kit	Stretch film+kraft paper
  rails		TL-R-2560/3405/4200	2560~3405~4200mm	AL 6005-T5	SUS304 screw kit	Stretch film+kraft paper
  Strengthened angle		TL-AS-40/1820	1820mm	Q235	SUS304 screw kit	Stretch film+kraft paper

1. Easy installation

Pre-installed bracket accessories save time and effort for on-site installation, which can greatly reduce construction costs

Second, high durability

20-year life photovoltaic bracket design concept, high-strength material guarantee.

III. International standards

Comply with European, American, Australian and other photovoltaic standards

four, wide applicability

The slanted roof photovoltaic mounting system is suitable for all kinds of general framed solar panel installations on the existing market, from small solar systems to large and even several megawatt systems.

Design requirements: AS/NZS 1170 and other international common standards, etc.

Installation environment: open ground or concrete piles or in-line or ground piles, etc.    

Installation angle: 0~60°

Installation height: within 5 meters from the ground or horizontal surface                

System Material: Q235 & AL 6005-T5

Wind speed: 60m/s                              

System Color: Natural or Custom                          

Snow load resistance: 1.4KN/㎡                       

Finish: Stainless Steel & Hot-Dip Galvanized

Warranty Commitment: 10-year warranty, 20-year service life